Advanced type

►Size: 10.1"
►CPU: CortexM4
►Resolution: 1024x600 (16:9)
►Interface: RS232/RS485
►Viewing Area (mm): 222.7*125.3
►Brightness(cd/m²): 1000; 500; 300



LCD Controller


Refresh Rate


Picture Switching Speed

63 ms/frame (16 images/s)

Flash Memory

Standard 128MB, Extension 1GB

Memory Amount for picture

According to the capability of the image, Suggest "JPG" format.


RS232/ USB Interface

Image downloading

USB2.0 (12Mbps) & U storage Disk downloading

Voltage Range

DC6.0V ~ 40V (typical value: 12V)


3.0 W

Backlight Type



400 cd/m2(Brightness can be adjustable in 100 levels.)



Backlight life

30000 hours

Viewing Angle

70°/ 70°/ 50°/ 70°(L/R/U/D)

Working Temperature

-20°C ~ +70°C

Working Humidity

55°C, 85%

Storage Temperature

-30°C ~ +80°C

Screen Mode




Size (Inch)

10.1 inch




65536 colors (16 bit)

Viewing Area


Pixel Spacing

0.1905mm×0.0635mm (H×V)

Overall Dimension


Net Weight


 TFT Panel

A+ Class Industry Panel

Touch Screen

Industry Level 4 wire resistance
Or without touch screen is optional.



Working Temperature

-20℃~ +70℃

 Air Humidity

60°C, 90%

Continuous Vibration Testing

10-55Hz, 1.5mm, 10G

 Impact Acceleration Testing

6ms, 100G

ESD Testing


Radiation Reliability Testing


10.1-inch smart uart TFT LCD display description:


STONE provides an Intelligent HMI solution. The uart TFT touch screen display set since it is embedded with a Cortex-M4 32-bit CPU processor and LCD driver, so you don’t have to re-design the LCD driver anymore. The pictures or audio/video files can be stored in the memory, so you can use any simple MCU to control the rs232 touch screen monitor display by sending hex commands through the UART port.

The TFT touch screen display consists of a CPU, TFT drives, flash memory, UART port, power supply, etc. STONE also provides a basic control program and powerful design software (STONE TOOL Box). You can use it to set various functions on the graphical user interface, such as text, figures, curve, image switching, keyboard, progress bar, the slider, dial-up, clock and touch button, data storage, the USB download, video, and audio.

It is very easy for engineers to develop the uart TFT display color user interface and touch control functions, which can reduce a lot of development time and cost. 



STVA101WT-01 smart uart TFT LCD display dimensional drawing:





STONE UART TFT Display Specifications:


• Cortex m4 CPU;
• UART interface (RS232/RS485/TTL) ;
• 256-byte register;
• 128 kb variable memory;
• 128 MB flash memory, expandable to 1 GB;
• GUI design software;
• The customized command set;
• 8-channel curve trend chart memory;
• extremely fast variable display response speed;
• The single-page supports up to 128 display variables;
• Integrated real-time clock RTC,
• Touch buzzer sound function;
• Support software 90 degrees, 180 degrees, 270-degree screen rotation, adjust the appropriate visual Angle;



STONE TOOL Box(GUI Design software):


STONE TOOLBox (software)


-- Free and easy to use STONE TOOL Box software

-- property value components that can be allocated at run time

-- Drag-and-drop components for GUI design and interaction

-- built-in debugger for HMI project emulation



Sample for the STONE UART TFT Display Developing:


1) Design your own interface with the TOOL software with .jpg files and generate a project file.

2) Download the project file into the STONE TFT screen display by USB, then connect the display with your MCU or other control devices by UART interface (RS232/RS485/TTL).

3) Program your MCU to communicate with the display by the customized command sets.
For example:  Show integer "1234 ", the UART returns the command: 

A5 5A 05 82 00 20 04 D2 


A5 5A: Frame head 
05: command byte length, 83 00 20 04 D2 total 5 bytes (without frame header) 
83: write variable register command 
00 20: Variable address, setting in control properties
04 D2: Data content, 1234 hexadecimal data



Package Including:


1 * STONE HMI RS232 10.1" 1024x600 (16:9) UART TFT Display Module with LCD drive

2 * Transfer board

2 * 8 pin terminal block

2 * 20mm long cable

1 * U disk

1 * USB cable

1 * 5mm short cable

1 * 20mm DB9 cable



STONE authentication and documentation:


- software

- instruction set

- editorial guide

- CE certification

- ROHS certification

- ISO9001 certification

FC certification





       1.  5-YEAR Warranty Period
               Replace by a brand-new Unconditionally

      2.  customizable service.
               a. Customize TFT-LCD Module according to the customer’s requirement.
               b. Develop the customization function.
               c. Optional resolution
               d. Optional luminance


      Optional UART interface type (RS232/RS485/TTL)

      Optional touch control type (resistive/capacitive/non-touch)



Frequently asked questions:


1. Can we use the CANBUS/MODBUS protocol to communicate with the STONE UART TFT Display?

  A: No. The CANBUS/MODBUS protocol is not supported for now.


2. Can we use Arduino as the controller of the STONE UART TFT Display module?

A: Yes. Arduino has the TTL signal pin. You can directly use a STONE touch screen rs232 display with the TTL interface (please contact our staff to confirm the interface type). Or you can use the MAX3323 chip to converter the TTL signal to the RS232 signal. 

You can check the link to get the specific steps: 



3. Can we use Raspberry Pi as the controller of the STONE UART TFT Display module?

A: Yes. Raspberry Pi provides a build-in/mini UART Port.

They are implemented using different hardware blocks, so they have slightly different characteristics. However, both are 3.3V devices, which means extra care must be taken when connecting up to an RS232, RS485 TTL, or other systems that utilize different voltage levels.

You can check more details in the link below:  




Frequently asked questions:


1. What's the OS requirement for the TOOL software?

A: You can run the software under the Windows system. Linux or Mac OS is not supported. You can download the software on our website for free.


2. Can we use customized font for the interface?

A: Yes, we provide you the font design software. You can download it on our website for free.


3. Do you have some demo projects for reference?

A: Yes. We have over 20 DEMOS including medical devices, beauty machines, dashboard, home control systems, vending machine, EV charger, solar system and etc. Please contact our staff for the detail and let them send you the demo you need.


4. Can we connect the camera to the display?

A: No. The only data input interface is UART. You can not input video signals.





1)  Easy to develop:

The STONE product is already embedded in a CORTEX M4 CPU and the LCD drivers. So you don’t have to develop all the systems for the display part, which can save a lot of time and cost for a new project.


2)  Easy to learn:

You don’t have to do the interface designing from every single pixel. You can directly use .jpg or .bmp files, follow our manual or video instructions to create a very beautiful and special interface with the TOOLS GUI design software.


3)  Easy to use:

No system or application required. Very fast booting, plug and play.